Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Remove the CCD and the lens ribbon cable from the connectors. To release the CCD cable, gently slide the brown clips on either side to the left. This will release the cable. Desolder the connector from the top PCB. Use a soldering wick and flux to make the task easier.
  • Remove the CCD and the lens ribbon cable from the connectors.

  • To release the CCD cable, gently slide the brown clips on either side to the left. This will release the cable.

  • Desolder the connector from the top PCB. Use a soldering wick and flux to make the task easier.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.