Inglese
Italiano

Traduzione in corso passo 4

Passo 4
LCD holder removed from logic board disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable. With the ribbon cable disconnected, remove the front case.
  • LCD holder removed from logic board

  • disconnect the ribbon cable from the logic board. This one requires to move the brown tabs on the left and right hands side in an upward direction. They should just slide up by about an 1/8th of an inch. this will free the ribbon cable.

  • With the ribbon cable disconnected, remove the front case.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.