Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
With the case split, you can see the LCD in its holder. The LCD is simply laid into the holder. Gently remove the LCD from the holder and just flip it to the side. Do not remove it yet. You will have to loosen the clip on the connector. Use your fingernails to move it in the opposite direction from the LCD, this will open it up. Remove the four screws from the LCD holder.
  • With the case split, you can see the LCD in its holder. The LCD is simply laid into the holder.

  • Gently remove the LCD from the holder and just flip it to the side. Do not remove it yet. You will have to loosen the clip on the connector. Use your fingernails to move it in the opposite direction from the LCD, this will open it up.

  • Remove the four screws from the LCD holder.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.