Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
First, turn the drone over, so it is right side up, and facing away from you. Now, use a metal spudger to pry open the rear end of the case. Be careful not to pull too far up,  as there is still a cable which is connecting the two pieces. Side the sludge down the length of each side, undoing all the clips along the way, stop 1-2 cm before the ending of the battery cradle. Side the sludge down the length of each side, undoing all the clips along the way, stop 1-2 cm before the ending of the battery cradle.
Pry up Rear Case
  • First, turn the drone over, so it is right side up, and facing away from you. Now, use a metal spudger to pry open the rear end of the case. Be careful not to pull too far up, as there is still a cable which is connecting the two pieces.

  • Side the sludge down the length of each side, undoing all the clips along the way, stop 1-2 cm before the ending of the battery cradle.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.