Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 11

Passo 11
Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro. Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board. When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.
  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.

  • Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.

Levantando desde el lado más cercano a la batería, gira la placa lógica hacia la parte superior de la MacBook Pro.

Usando el extremo plano de un spudger, empuja con cuidado el conector MagSafe 2 fuera de su zócalo en la parte inferior de la placa lógica.

Al volver a instalar la placa lógica, verifica los cables en las ubicaciones marcadas para asegurarse de que no quedan fijados debajo de la placa lógica.

En el sentido de las agujas del reloj desde la parte superior: teclado, panel táctil, batería, altavoz derecho, del teclado, pantalla, micrófono, toma de auriculares, altavoz izquierdo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.