Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 2

Passo 2
Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board. Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board
  • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

  • Use the tip of a spudger to pry the right speaker connector up and out of its socket on the logic board

  • Be sure to pry on the cable head, and not on the socket itself. Prying on the socket may cause it to separate from the logic board.

使用撬棒扁平一端翘起连接到逻辑板上的左扬声器插头。

使用撬棒的尖端来翘起连接到逻辑板上的右扬声器插头。

请确保撬动线缆头,而不是插座本身。 撬动插座将会导致其与逻辑板分离。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.