Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
  • Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Starting at the top of the cable, slide a plastic opening tool under the right fan cable to free it from the logic board.

  • Use caution when freeing the cable, as it is strongly adhered to the logic board.

スパッジャーの先端を使って、右側ファンのリボンケーブルの ZIFソケット 上の固定フラップを持ち上げて裏返します。

固定フラップの蝶番部分をこじ開けてください。ソケット自体には接触しないでください。

右側ファンケーブルの下に差し込んだプラスチック製の開口ツールをケーブル上部からスライドして、基板から解放します。

ケーブルを外す際はご注意ください。基板に多量の接着剤で固定されています。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.