Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Gently disconnect the three ribbon cables. Take a Phillips #1 screwdriver and remove the four screws on the optical drive. Two of the screws can't be seen on the picture, they are located on the opisite side from the visable ones.
  • Gently disconnect the three ribbon cables.

  • Take a Phillips #1 screwdriver and remove the four screws on the optical drive.

  • Two of the screws can't be seen on the picture, they are located on the opisite side from the visable ones.

  • Pull up the optical drive and carefully peel the flex cable, attached underneath the drive, from the metal plate.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.