Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 12

Passo 12
Back the adjustment limiter "stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in! The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops. Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.
Remove upper burr holder
  • Back the adjustment limiter "stop-screw" out HALF WAY. Leaving it partly in insures we don't lose track of what hole it belongs in!

  • The stop-screw should be out just enough that you can rotate the grind adjuster freely past the stops.

  • Rotate the grind adjuster clockwise (second pic) until the upper burr holder cylinder backs all the way out.

  • Remove the upper burr holder, noting the slot orientation for later.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.