Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Using the long #2 Phillips Screwdriver (7 inches or more) remove the 4 inside top screws and set aside. Next VERY CAREFULLY turn the grinder over to be right-side-up again. You want to avoid stress on the wires.
Remove inside top screws
  • Using the long #2 Phillips Screwdriver (7 inches or more) remove the 4 inside top screws and set aside.

  • Next VERY CAREFULLY turn the grinder over to be right-side-up again. You want to avoid stress on the wires.

  • Perhaps place the unit on a towel so there is minimal stress on the wires while we work on the top. As we continue remain aware of the wires so they do not get stressed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.