Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Nessuna immagine
Wait until oil is cool!
  • Oil may be hot! Wait and allow the engine to cool. If the engine is too hot to touch, do not remove the oil drain plug. Hot oil will burn you!

  • Remove the oil dipstick and oil fill cap from under the hood. Place them in a safe place and save them for after you have refilled the engine with oil.

  • Place an oil drain pan beneath the oil drain plug. When safe, loosen the plug with an 17 mm socket wrench.

  • As soon as the plug turns a little, switch to loosening it by hand. Oil will begin to drain! Adjust the oil pan if necessary to catch the draining oil.

  • The video skips to removing the oil filter: first remove the oil drain plug when safe, then allow the oil to drain until it slows to a trickle.

  • Finally go ahead and remove the oil filter with an oil filter wrench. The video shows this at around 1 min 27 sec.

  • The filter is filled with old oil too. Dump its contents into the oil drain pan, and discard the old filter.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.