Salta al contenuto principale

Nintendo 2DS XLの分解

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Nintendo 2DS XL Teardown, Final Thoughts: passo 0, immagine 1 di 1
Final Thoughts
  • The battery is fairly easy to swap out once you remove the back cover.

  • The rear panel is secured by tri-point screws.

  • The headphone jack and charging connector are soldered to the motherboard.

  • The upper display is glued in place and requires prying that can potentially break the display.

バッテリーはバックカバーを取り出すと、とても簡単に外せます。

リアパネルはトライポイントネジで固定されています。

ヘッドホンジャックと充電コネクターはマザーボードに半田付けされています。

上部ディスプレイは圧着剤で固定されており、こじ開ける必要があります。作業の途中、ディスプレイスプレイにダメージを与えてしまう可能性があります。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.