Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

次の手順では、電源装置の露出面に手を近づけます。 電源装置の表面または露出したはんだ部分に触れないでください。触れてしまうと、ボードに取り付けられた多くの大型コンデンサからの高圧ショックを受けてしまう危険性があります。

スパッジャーの先端を使用して、電源ボタンケーブルコネクタの両側を押し、ソケットからゆっくりと引き出します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.