Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 1

Passo 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

Los siguientes pasos llevan tus manos cerca de la cara expuesta de la fuente de energía. No toques la cara de la fuente de energía o alguna de las soldaduras expuestas. Tocarlas supone el riesgo de recibir una descarga de alto voltaje de alguno de los capacitores de gran tamaño soldados a la placa.

Usa la punta de un spudger para presionar cada lado del conector del cable del botón de encendido para que camine lentamente fuera de su zócalo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.