Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Use a spudger to disconnect the power button connector from its socket on the logic board. Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock. Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock.
  • Use a spudger to disconnect the power button connector from its socket on the logic board.

  • Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock.

Löse mit der Spudgerspitze den Stecker der Einschalttaste aus seinem Anschluss auf dem Logic Board.

Sei dabei vorsichtig und berühre keine Lötstellen auf der Rückseite der Netzteilplatine. Die Kondensatoren könnten noch aufgeladen sein und dir gefährliche Stromschläge versetzen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.