Salta al contenuto principale

Sostituzione gruppo schermo iPad Pro 12.9"

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 4le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
iPad Pro 12.9" Display Assembly Replacement, Tape over a cracked screen: passo 0, immagine 1 di 3 iPad Pro 12.9" Display Assembly Replacement, Tape over a cracked screen: passo 0, immagine 2 di 3 iPad Pro 12.9" Display Assembly Replacement, Tape over a cracked screen: passo 0, immagine 3 di 3
Tape over a cracked screen
  • Completely power down your iPad before you begin.

  • If your screen is cracked, lay overlapping strips of clear packing tape over the iPad's screen until the whole face is covered.

  • This will keep glass shards contained and provide structural integrity when prying and lifting the screen.

  • Do your best to follow the rest of the guide as described. However, once the glass is broken, it will likely continue to crack as you work, and you may need to use a metal prying tool to scoop the glass out.

  • Wear safety glasses to protect your eyes, and be careful not to damage the LCD screen.

Spegni completamente il tuo iPad prima di iniziare

Se il vetro del tuo schermo è crepato, applica delle strisce di nastro adesivo trasparente sullo schermo dell'iPad sovrapponendole finché tutta la superficie sarà coperta.

Questo conterrà i frammenti di vetro e fornirà un'integrità strutturale quando si fa leva e si solleva lo schermo.

Fai del tuo meglio per seguire il resto della guida come descritta, ma, una volta che il vetro è rotto, è molto probabile che si continuerà a rompere mentre lavori e potresti avere bisogno di usare uno strumento per fare leva per rimuovere i pezzi di vetro.

Indossa occhiali protettivi per proteggere i tuoi occhi e fai attenzione a non danneggiare lo schermo LCD.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.