Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Remove the ribbon cable GENTLY use your flat head screwdriver to pry up each side of the black clip evenly until the ribbon releases. At this point, the mouse shield should be free from the mouse board.
  • Remove the ribbon cable GENTLY use your flat head screwdriver to pry up each side of the black clip evenly until the ribbon releases.

  • At this point, the mouse shield should be free from the mouse board.

  • If you have an older model mouse, follow steps 4 to 7.

  • If you have a newer model mouse, jump to steps 8.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.