Salta al contenuto principale
Inglese
Cinese

Traduzione in corso passo 7

Passo 7
As we delve deeper into the shallow device, we realize we haven't spotted any internal cabling yet. We find this 3.5 mm headphone jack and speaker driver right where we expect ...
  • As we delve deeper into the shallow device, we realize we haven't spotted any internal cabling yet.

  • We find this 3.5 mm headphone jack and speaker driver right where we expect ...

  • ... but instead of routing their ribbon cables over the top of the speaker resonance chamber like in their 12.9" counterparts, Apple has tucked the cables rather inconveniently underneath—that is, sandwiched between the speaker and rear case.

  • Lifting up a strip of padded conductive tape, we find screws! Last time we had a sad time removing Pro speakers, so screws are a good sign.

  • Psych—those screws didn't save us from fighting through nasty adhesive to remove the speakers.

正当我们对这部设备发起更深的探索时,我们意识到,目前为止还没有看到任何内部的连接线。

就在我们期待的地方,发现了3.5毫米耳机孔和扬声器。

Apple将线缆非常不方便的藏在了扬声器下方,像三明治夹心一样处在扬声器和后壳之间。这并不像12.9寸那样将连接线布置在扬声器上方。

提起一条导电胶带,我们找到了螺丝!上一次我们移除iPad Pro12.9的扬声器非常不顺,所以这次的螺丝是一个好兆头。

哎 - 这些螺丝并没有解救我们。还是要通过去除讨厌的粘合剂来移除扬声器。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.