Samsung Galaxy S8 指纹传感器更换

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese

Cinese

Traduzione in corso passo 1

Passo 1

If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
Push the fingerprint sensor off of its adhesive from the outside of the glass.
If the sensor is stubborn, gently slide an opening pick under the plastic backing to loosen the adhesive before pushing.
This will make the adhesive less likely to be reusable, so try pushing with your finger first.

-	[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
-	[* black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
-	[* black] If the sensor is stubborn, gently slide a halberd spudger under the plastic backing to loosen the adhesive before pushing.
+	[* black] If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:
+	[* black] Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.
+	[* black] Push the fingerprint sensor off of its adhesive from the outside of the glass.
+	[* black] If the sensor is stubborn, gently slide an opening pick under the plastic backing to loosen the adhesive before pushing.
	[* icon_note] This will make the adhesive less likely to be reusable, so try pushing with your finger first.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.