Aggiusta le tue cose Community Store

Samsung Galaxy S8の指紋認証センサー

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida
Inglese
Giapponese
Passo successivo

Traduzione in corso passo 1

Passo 1
Samsung Galaxy S8 Fingerprint Sensor Replacement: passo 0, immagine 1 di 3 Samsung Galaxy S8 Fingerprint Sensor Replacement: passo 0, immagine 2 di 3 Samsung Galaxy S8 Fingerprint Sensor Replacement: passo 0, immagine 3 di 3

  • If you're installing a new rear glass panel, you'll also need to transfer the fingerprint sensor to your new rear glass panel as follows:

  • Reheat an iOpener and apply it to the fingerprint sensor mounted to the rear glass.

  • Push the fingerprint sensor off of its adhesive from the outside of the glass.

  • If the sensor is stubborn, gently slide an opening pick under the plastic backing to loosen the adhesive before pushing.

  • This will make the adhesive less likely to be reusable, so try pushing with your finger first.

また、新しいリアガラスパネルを取り付ける場合は、以下の手順で指紋センサーを新しいリアガラスパネルに移し替える必要があります。

iOpenerを再加熱して、背面ガラスに取り付けた指紋センサーに当てます。

ガラスの外側から指で指紋認証センサーを押し、圧着剤から外します。

センサーが頑丈で外れない場合は、圧着剤を緩めるために、スパッジャー(鉾型ヘラ)をプラスチックの裏打ちの下に丁寧に差し込みます。

この作業をすると圧着剤の再利用ができなくなります。そのため、なるべく指で押し出す作業を優先してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.