Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 3le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Insert one of the pry tools under a top corner and the other tool under the side of the same corner. Make sure to get under the metal of the keyboard, not just the first layer of plastic. Then pry the corner down and out from under the little overhang its sitting under.
-
Next, slide the pry tool on the top over to the next overhang and insert the second tool on the other side. Push down and pry out the keyboard.
-
Repeat the same process all the way down to the opposite corner.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.