Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
With the display panel still lifted, disconnect the four inverter cables. During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.
  • With the display panel still lifted, disconnect the four inverter cables.

  • During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.

  • (combined into one plug in on the 24")

  • Be sure to keep track of the cables, as they do not have proprietary sockets. Mismatched cables can cause screen issues.

Mentre il pannello del display è sollevato, scollegare i quattro cavi dell'inverter.

Durante la reinstallazione, posizionare i quattro connettori dei cavi dell'inverter negli spazi vuoti fra i componenti collegati al pannello posteriore per garantire il corretto allineamento del pannello del display sui bordi del case posteriore.

(in un solo connettore nel modello da 24")

[* black] With the display panel still lifted, disconnect the four inverter cables.
[* icon_reminder] During reinstallation, place the four inverter cable connectors in voids between components attached to the rear panel so the display panel will sit flush on the edges of the rear case.
[* black] (combined into one plug in on the 24")
[* icon_caution] Be sure to keep track of the cables, as they do not have proprietary sockets. Mismatched cables can cause screen issues.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.