Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Use a spudger to disconnect ribbon cable(s) 1, 2, and 3. Just a reminder. The 3rd cable is actually connected to the board by a port, which requires an inset connector. Lift up the black tab on the back of the inset connector port, and then the 3rd ribbon should slide right out.
  • Use a spudger to disconnect ribbon cable(s) 1, 2, and 3.

  • Just a reminder. The 3rd cable is actually connected to the board by a port, which requires an inset connector.

  • Lift up the black tab on the back of the inset connector port, and then the 3rd ribbon should slide right out.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.