Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 5

Passo 5
Slide an opening pick or the blade of a Halberd spudger down the side of the phone, separating the adhesive. Go slowly so that the tool doesn't slip out of the seam. If cutting becomes difficult, reheat and reapply the iOpener.
  • Slide an opening pick or the blade of a Halberd spudger down the side of the phone, separating the adhesive.

  • Go slowly so that the tool doesn't slip out of the seam. If cutting becomes difficult, reheat and reapply the iOpener.

Ziehe den Spudger an der and der Seite des Smartphones herunter um den Klebstoff zu lösen.

Arbeite langsam und sorgfältig, damit der Spudger nicht aus dem Spalt herausrutscht. Wenn es schwierig wird, musst du den iOpener nochmals anwenden.

[* black] Slide an opening pick or the blade of a Halberd spudger down the side of the phone, separating the adhesive.
[* icon_note] Go slowly so that the tiptool doesn't slip out of the seam. If cutting becomes difficult, reheat and reapply the iOpener.
[* black] Slide an opening pick or the blade of a Halberd spudger down the side of the phone, separating the adhesive.
[* icon_note] Go slowly so that the tiptool doesn't slip out of the seam. If cutting becomes difficult, reheat and reapply the iOpener.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.