Salta al contenuto principale

Riscaldamento iOpener

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 444le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
iOpener Heating, Alternate iOpener heating method: passo 0, immagine 1 di 2 iOpener Heating, Alternate iOpener heating method: passo 0, immagine 2 di 2
Alternate iOpener heating method
  • If you don't have a microwave, follow this step to heat your iOpener in boiling water.

  • Fill a pot or pan with enough water to fully submerge an iOpener.

  • Heat the water to a boil. Turn off the heat.

  • Place an iOpener into the hot water for 2-3 minutes. Make sure the iOpener is fully submerged in the water.

  • Use tongs to extract the heated iOpener from the hot water.

  • Thoroughly dry the iOpener with a towel.

  • The iOpener will be very hot, so be careful to hold it only by the end tabs.

  • Your iOpener is ready for use! If you need to reheat the iOpener, heat the water to a boil, turn off the heat, and place the iOpener in the water for 2-3 minutes.

Se non hai un microonde, segui questo passo per scaldare il tuo iOpener in acqua bollente.

Riempi una pentola o una padella con abbastanza acqua per immergerci un iOpener.

Scalda l'acqua finché non bolle. Spegni il fuoco.

Posiziona l'iOpener nell'acqua calda per 2-3 minuti. Assicurati che l'iOpener sia completamente immerso nell'acqua.

Usa delle pinze per estrarre l'iOpener scaldato dall'acqua calda.

Asciuga accuratamente l'iOpener con un asciugamano.

L'iOpener sarà molto caldo, quindi fai attenzione e tienilo solo dalle linguette alle estremità.

Il tuo iOpener è pronto all'uso! Se devi scaldare di nuovo l'iOpener, scalda l'acqua fino all'ebollizione, spegni il fuoco e immergi l'iOpener in acqua per 2-3 minuti.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.