Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 14le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge. The suction cup will not make a good seal on the curved portion of the glass.
  • Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.

  • The suction cup will not make a good seal on the curved portion of the glass.

  • If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.

  • Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

Quando il pannello posteriore è caldo al tatto, applica una ventosa il più vicino possibile al bordo riscaldato del telefono evitando la parte incurvata.

La ventosa non aderirà bene sulla parte incurvata del vetro.

Solleva la ventosa e inserisci uno spudger halberd o un plettro di apertura sotto il vetro posteriore.

Siccome il vetro è incurvato, dovrai spingere l'attrezzo inserendolo verso l'alto e non parallelamente al piano del telefono.

[* black] Once the back panel is warm to the touch, apply a suction cup as close to the heated edge of the phone as you can while avoiding the curved edge.
[* icon_note] The suction cup will not make a good seal on the curved portion of the glass.
[* icon_note] If the phone's back cover is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed.
[* black] Lift on the suction cup, and insert a halberd spudger, or opening pick, under the rear glass.
[* icon_note] Due to the curved glass, you will be pushing up, rather than inserting parallel to the plane of the phone.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.