Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Use a plastic opening tool to pry the edges of the metal cover. Loosen the adhesive around the perimeter of the metal cover. The adhesive can be difficult to remove. Use tweezers on any troubling sections. After removing the adhesive, take off the keyboard’s metal cover.
  • Use a plastic opening tool to pry the edges of the metal cover.

  • Loosen the adhesive around the perimeter of the metal cover.

  • The adhesive can be difficult to remove. Use tweezers on any troubling sections. After removing the adhesive, take off the keyboard’s metal cover.

  • If the cover doesn’t come off, repeat prying around the edges with a plastic opening tool.

  • Lift the metal cover.

  • Apply adhesive during reassembly to fasten the metal cover onto the keyboard mount.

  • If only certain keys need replacement, stop here. Instead, use tweezers to remove individual keys by loosening their four snap-on clips from the metal backing.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.