Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 6le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis. For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel. Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.
  • In the following steps, you will separate the display panel by slicing though the adhesive bonding the display to the Pixel's chassis.

  • For reference, the back of the display panel is shown at left. Note the narrow clearance between the side of the display unit and the OLED panel.

  • Inserting an opening tool deeper than 1.5 mm into the sides of the device, or 9 mm into the top and bottom can permanently damage the display.

In den folgenden Schritten wirst du die Klebeverbindung zwischen Bildschirmglas und Rahmen des Pixels auftrennen.

Zur Verdeutlichung ist die Rückseite des Displays auf der linken Seite gezeigt. Beachte den schmalen Freiraum zwischen der Seitenkante der Displayeinheit und dem OLED Panel.

Wenn du ein Öffnungswerkzeug an den Seiten tiefer als 1,5 mm einsetzt, oder oben und unten mehr als 9 mm, kannst du das Display dauerhaft beschädigen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.