Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
After putting the slider back on the zipper, sew the ends of the zipper to prevent the slider from sliding off. Insert the needle through one side of the zipper fabric and pull until it stops at the knot. Then, insert the needle through the other side of the zipper fabric and pull tightly until it seems secure.
  • After putting the slider back on the zipper, sew the ends of the zipper to prevent the slider from sliding off.

  • Insert the needle through one side of the zipper fabric and pull until it stops at the knot.

  • Then, insert the needle through the other side of the zipper fabric and pull tightly until it seems secure.

  • Repeat this step as many times as needed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.