Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 4

Passo 4
Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate. Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate. Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.
  • Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

  • Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

  • Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

T8トルクスドライバーを使用して、メタルプレートから銀色のねじ(10 ㎜ ×11本)を取り外します。

#1プラスドライバーを使用して、メタルプレートから黒い4 ㎜のねじ11本を取り外します。

スパッジャーを使用して、3本のアンテナケーブル(黒×2本、白×1本)をソケットから真上にこじ上げて取り外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.