Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 4

Passo 4
Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate. Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate. Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.
  • Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

  • Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

  • Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

Utilisez un tournevis de sécurité Torx T8 pour retirer les onze vis argentées de 10 mm de la plaque métallique.

Utilisez un tournevis cruciforme n ° 1 pour retirer les onze vis noires de 4 mm de la plaque métallique.

Utilisez une spatule pour déconnecter les trois câbles d'antenne (deux noirs et un blanc) en les soulevant directement de leurs prises.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.