Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 4

Passo 4
Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate. Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate. Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.
  • Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

  • Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

  • Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

Use a T8 Torx security screwdriver to remove the eleven 10mm silver screws from the metal plate.

Use a Phillips #1 screwdriver to remove the eleven 4mm black screws from the metal plate.

Use a spudger to disconnect the three antenna cables (two black and one white) by prying them straight up from their sockets.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.