Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Torna alla Guida
Inglese
Italiano
Passaggio precedente Passo successivo

Traduzione in corso passo 2

Passo 2
Remove the fingerprint sensor. To reinstall the fingerprint sensor, it is easier to attach it to the motherboard first before positioning it in its indentation. Align the fingerprint sensor's connector to the motherboard socket, which is located on the underside near the battery edge.

  • Remove the fingerprint sensor.

  • To reinstall the fingerprint sensor, it is easier to attach it to the motherboard first before positioning it in its indentation.

  • Align the fingerprint sensor's connector to the motherboard socket, which is located on the underside near the battery edge.

  • Use your finger to press the connector into the socket. Do not use excessive force! The connector should click into position if done correctly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.