Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use the flat end of a spudger to flip up the retaining flap on the case buttons' ZIF connector on the logic board. Use a pair of tweezers to grasp the case buttons' cable and remove it from the ZIF connector. Use a pair of tweezers to grasp the case buttons' cable and remove it from the ZIF connector.
  • Use the flat end of a spudger to flip up the retaining flap on the case buttons' ZIF connector on the logic board.

  • Use a pair of tweezers to grasp the case buttons' cable and remove it from the ZIF connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.