Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Reattach the daughter board connector to the mainboard. When re-inserting the mainboard, use a plastic spudger to push the battery pins in so the mainboard sits properly in the frame and the pins make a good contact with the battery. Re-connect the display connector, camera and cable to the mainboard.
  • Reattach the daughter board connector to the mainboard.

  • When re-inserting the mainboard, use a plastic spudger to push the battery pins in so the mainboard sits properly in the frame and the pins make a good contact with the battery.

  • Re-connect the display connector, camera and cable to the mainboard.

  • Screw the mainboard to the frame

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.