Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 5

Passo 5
Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes. Give the pick a firm twist to pop free the third clip securing the lower case to the chassis. Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.
  • Insert your opening pick once again under the front edge of the lower case, near one of the two centermost screw holes.

  • Give the pick a firm twist to pop free the third clip securing the lower case to the chassis.

  • Repeat this procedure near the other of the two centermost screw holes, popping the fourth clip free.

開口ピックを底部ケースの2本の中央ネジ穴の1つの付近にある、正面側端の下に再び差し込みます。

ピックをしっかりと持って捻り、筐体と底部ケースを固定している3番目のクリップを外します。

この手順を中央ネジ穴のもう一方の付近でも繰り返して、4番目のクリップも外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.