Skip to main content

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 6

Step 6
Starting where the last pass left off, insert the metal spudger another two inches underneath the battery. As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery. Repeat this process for the remaining adhesive strips.
  • Starting where the last pass left off, insert the metal spudger another two inches underneath the battery.

  • As you push the spudger further underneath the battery, keep it as flat against the rear case as possible to avoid bending the battery.

  • Repeat this process for the remaining adhesive strips.

Comenzando donde quedó el último pase, inserte el spudger metálico otras dos pulgadas debajo de la batería.

A medida que empuja el spudger más por debajo de la batería, manténgalo lo más plano posible contra la carcasa posterior para evitar doblar la batería.

Repita este proceso para las tiras adhesivas restantes.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.