Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector. Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board. Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.
  • Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

  • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Löse das Isolierband, das den Kabelstecker der Kopfhörerbuchsen Einheit bedeckt, ab.

Klappe mit der Spudgerspitze die Haltelaschen an den beiden ZIP Steckern, mit denen das Kopfhörerbuchsen Kabel am Logic Board befestigt ist, um.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.