Aggiusta le tue cose Community Store

iPad 3 4G LCD ersetzen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo precedente Passo successivo

Traduzione in corso passo 2

Passo 2
iPad 3 4G LCD Replacement: passo 0, immagine 1 di 3 iPad 3 4G LCD Replacement: passo 0, immagine 2 di 3 iPad 3 4G LCD Replacement: passo 0, immagine 3 di 3

  • Flip up the retaining flap on the LCD ribbon cable ZIF connector.

  • Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.

  • You may have to force restart the iPad by holding down the power button and home button for at least ten seconds until you see the Apple logo if the LCD screen doesn't power on after connecting the ZIF connector for the LCD screen when putting everything back together.

Klappe die Haltelasche über dem ZIF Stecker des LCD Flachbandkabels hoch.

Löse mit den Händen oder eine Pinzette das LCD Flachbandkabel von seiner Fassung auf dem Logic Board.

[* black] Flip up the retaining flap on the LCD ribbon cable ZIF connector.
-[* black] Using your fingers or a pair of tweezers, pull the LCD ribbon cable from its socket on the logic board.
+[* black] Using your fingers or a pair of [product|IF145-020|tweezers], pull the LCD ribbon cable from its socket on the logic board.
+[* icon_reminder] You may have to force restart the iPad by holding down the power button and home button for at least ten seconds until you see the Apple logo if the LCD screen doesn't power on after connecting the ZIF connector for the LCD screen when putting everything back together.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.