Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Turn the motherboard assembly over to the side with the LCD and the camera lens. Gently wedge a plastic opening tool underneath the foam padding on top of the LCD ribbon cable.
  • Turn the motherboard assembly over to the side with the LCD and the camera lens.

  • Gently wedge a plastic opening tool underneath the foam padding on top of the LCD ribbon cable.

  • Pry the foam padding up until the LCD ribbon cable can be lifted off the surface of the motherboard.

  • Do not try to remove the LCD yet, as its ribbon cable is still connected to the motherboard via a ZIF connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.