Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
After removal of the LCD screen and ribbon cable the camera sensor can be accessed. Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.
  • After removal of the LCD screen and ribbon cable the camera sensor can be accessed.

  • Position the camera with the circuit board facing up, showing the two ribbon cables connecting the camera sensor.

  • Gently pry the black tabs on both cables until they are flipped up.

  • Gently pull the ribbon cables until they slide out of the connectors.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.