Salta al contenuto principale

Avviso: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Now turn your attention to the camera sensor and battery housing. Identify the two connection points of the large ribbon cable. Carefully place a flathead screwdriver under the left ribbon cable connection point and pull up to disconnect. Repeat the previous step but this time carefully remove the right ribbon cable connection point.
  • Now turn your attention to the camera sensor and battery housing. Identify the two connection points of the large ribbon cable.

  • Carefully place a flathead screwdriver under the left ribbon cable connection point and pull up to disconnect.

  • Repeat the previous step but this time carefully remove the right ribbon cable connection point.

  • After both sides of the ribbon cable have been disconnected it is ready to be replaced.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.