Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 15guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Remove following two screws: Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.
  • Remove following two screws:

  • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

  • One 8.6 mm Phillips screw

  • One 3.9 mm Phillips screw

  • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Entferne die folgenden zwei Schrauben:

Sei vorsichtig, diese Schrauben sind besonders leicht zu beschädigen. Übe festen Druck auf die Schrauben aus, während du sie herausdrehst. Lies die Kommentare durch, bevor du fortfährst.

Eine 8,6 mm Kreuzschlitzschraube

Eine 3,9 mm Kreuzschlitzschraube

Drehe vorsichtig das Gehäuse der AirPort/Bluetooth Karte (mit den immer noch angeschlossenen AirPort/Antennenkabeln ) aus dem unteren Gehäuse.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.