Aggiusta le tue cose Community Store

Sostituzione dell'unità ottica del MacBook Unibody modello A1278

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 5le guide che includono questo passo.

Torna alla Guida
Inglese
Italiano
Passo successivo

Traduzione in corso passo 1

Passo 1
MacBook Unibody Model A1278 Optical Drive Replacement, Optical Drive: passo 0, immagine 1 di 1
Optical Drive

  • Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board.

  • On some models, the subwoofer connector is soldered to the logic board and will break if you pry it off. If you need to replace the speaker/subwoofer, you can pull back the foam padding on the connector and remove the red and black wires to disconnect. You will need to reinsert the wires from the new speaker to reconnect.

  • If you are only removing the optical drive and not replacing the speaker/subwoofer, you do not need to disconnect this connector.

Inserisci qui la traduzione

Utilizzare l'estremità piatta di un inseritore per rimuovere il connettore del subwoofer estraendolo dalla scheda logica.

+[title] Optical Drive
[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board.
+[* icon_caution] On some models, the subwoofer connector is soldered to the logic board and will break if you pry it off. If you need to replace the speaker/subwoofer, you can pull back the foam padding on the connector and remove the red and black wires to disconnect. You will need to reinsert the wires from the new speaker to reconnect.
+[* icon_note] If you are only removing the optical drive and not replacing the speaker/subwoofer, you do not need to disconnect this connector.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.