Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Gently pull out both of the adhesive tabs out of the phone, parallel to the rear cover. If the adhesive tabs break, try to use a thin flat plastic tool such as a plastic card to remove the last of the adhesive. If the adhesive is stubborn, heat it with an iOpener or hair dryer and pry again.
  • Gently pull out both of the adhesive tabs out of the phone, parallel to the rear cover.

  • If the adhesive tabs break, try to use a thin flat plastic tool such as a plastic card to remove the last of the adhesive. If the adhesive is stubborn, heat it with an iOpener or hair dryer and pry again.

Tira con delicatezza all'esterno le strisce nere con le linguette adesive.

Non tirare mai le strisce verso l'alto ma sempre lateralmente. È facile che si rompa la striscia adesiva sotto la cover. In questo caso devi usare una scheda di plastica per staccare, con cautela, la cover posteriore; se necessario applica ancora del calore.

[* black] Gently pull out both of the black straps with the adhesive tabs.
[* icon_caution] Never pull
adhesive tabs out of the straps upwards but always sideways. It can easily happen that you rupturephone, parallel to the rear cover.
[* icon_note] If
the adhesive tabs right in between. In this casebreak, try to use a thin flat plastic tool such as a plastic card to pry offremove the back cover carefully, uselast of the adhesive. If the adhesive is stubborn, heat if necessary !it with an iOpener or hair dryer and pry again.
[* black] Gently pull out both of the black straps with the adhesive tabs.
[* icon_caution] Never pull
adhesive tabs out of the straps upwards but always sideways. It can easily happen that you rupturephone, parallel to the rear cover.
[* icon_note] If
the adhesive tabs right in between. In this casebreak, try to use a thin flat plastic tool such as a plastic card to pry offremove the back cover carefully, uselast of the adhesive. If the adhesive is stubborn, heat if necessary !it with an iOpener or hair dryer and pry again.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.