Salta al contenuto principale

Motorola Droid RAZR Camera Cover Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Motorola Droid RAZR Camera Cover Replacement: passo 0, immagine 1 di 2 Motorola Droid RAZR Camera Cover Replacement: passo 0, immagine 2 di 2
  • Use a heat gun or hair dryer to soften the adhesive underneath the camera cover.

  • The following steps were performed without the use of a heat gun. Notice that the camera cover cracks very easily if you do not heat the adhesive that holds it in place.

  • Gently pry up the bottom edge of the camera cover with a plastic opening tool.

  • Carefully slide the plastic opening tool across the bottom edge to free it from the adhesive.

  • Continue to use the heat gun as needed to soften the adhesive as you remove the camera cover.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.