Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Francese

Traduzione in corso passo 5

Passo 5
Insert an opening pick approximately 1/16 of an inch and slide it along the side to sparate the display from the frame. You might feel more resistance where the LCD ends on the lower end. Stop here and take your time to reheat that part and soften the glue.
  • Insert an opening pick approximately 1/16 of an inch and slide it along the side to sparate the display from the frame.

  • You might feel more resistance where the LCD ends on the lower end.

  • Stop here and take your time to reheat that part and soften the glue.

Insérez un médiator sur environ 1,5 mm et faites-le glisser le long du côté pour séparer l'écran du châssis.

Vous risquez de sentir plus de résistance en bas, à l'endroit où l'écran LCD se termine.

Arrêtez-vous là et prenez votre temps pour réchauffer cette partie et ramollir la colle.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.