Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 3le guide che includono questo passo.
Traduzione in corso passo 1
Passo 1
-
Using a Phillips #000 screwdriver, remove the four 2-mm screws from the side of the camera.
-
Remove the two 3-mm screws from the other side of the camera.
-
Finally, remove the three 4-mm screws from the bottom of the camera.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.