Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Cut one two-inch strip of bar tape from the roll, or use one of the two short strips found in the handlebar tape kit. Peel off the adhesive backing of the two-inch strip and affix it to the handlebar behind the brake lever clamp.
  • Cut one two-inch strip of bar tape from the roll, or use one of the two short strips found in the handlebar tape kit.

  • Peel off the adhesive backing of the two-inch strip and affix it to the handlebar behind the brake lever clamp.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.