Aggiusta le tue cose Community Store

Remplacement de l'écran LCD du Nikon Coolpix S230

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Francese
Passo precedente Passo successivo

Traduzione in corso passo 3

Passo 3
Nikon Coolpix S230 LCD Screen Replacement: passo 0, immagine 1 di 2 Nikon Coolpix S230 LCD Screen Replacement: passo 0, immagine 2 di 2

  • Carefully lift the LCD screen to reveal two orange ribbons connecting the screen to the camera.

  • Use tweezers to carefully lift the blue retaining flap holding down the orange ribbon cable. (Flap can be seen open in the second photo)

  • Slowly wiggle the ribbon cable back and forth while pulling away from the zero insertion force (ZIF) connector to disconnect the cable.

Soulevez délicatement l'écran LCD pour révéler deux rubans orange reliant l'écran à l'appareil photo.

Utilisez une pince à épiler pour soulever délicatement le volet de retenue bleu retenant le câble ruban orange. (Le rabat peut être vu ouvert sur la deuxième photo)

Agitez lentement le câble ruban d'avant en arrière tout en le retirant du connecteur à force d'insertion nulle (ZIF) pour déconnecter le câble.

[* black] Carefully lift the LCD screen to reveal two orange ribbons connecting the screen to the camera.
-[* red] Use tweezers to carefully lift the blue retaining flap holding down the orange ribbon cable. (Flap can be seen open in the second photo)
+[* red] Use [product|IF145-020|tweezers] to carefully lift the blue retaining flap holding down the orange ribbon cable. (Flap can be seen open in the second photo)
[* orange] Slowly wiggle the ribbon cable back and forth while pulling away from the zero insertion force (ZIF) connector to disconnect the cable.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.